This is a Manifold System for making various connections within an irrigation system.
The manifolds can be joined together to make larger items. Each Manifold will screw into the other using the male thread from one and the female thread from the other. Alternatively, using the 1" BSP male connectors (SOLD AS A PACK OF 2) you can combine the Manifolds by inserting into any of the ports to achieve the combination or layout that you require.
Each of the female ports has a built in rubber seal to prevent leakage when joining or adding fittings.
If you want an individual On/Off flow control on some or all of the ports you can screw in the threaded valve option.
You can connect a variety of fittings or connectors into the ports including hose tails, MDPE compression fittings, pipe / risers, taps and valves etc.
A selection of Hose Tails and MDPE compression fittings are available with either 3/4" BSP or 1" BSP threads (ALL SOLD AS A PACK OF 2)
If you are inserting into the Manifold ports, use the 1" threads. If you are inserting into the Valves, use the 3/4" threads.
If you want to block off any of the ports (either permanently or temporarily), you can do so using the 1" BSP Plugs. If you want to block off the 1" BSP male thread at one end of the Manifold, you can do so using the 1" BSP Caps.
Please Note: The colour and Style of the various fittings may vary from the pictures but will all be the same for each Manifold purchased.