In Line Stop Cock with Hose Tails 3/4" (20mm)


£6.99

In Line Stop Cock with Hose Tails 3/4" (20mm)
These 2-way plastic stopcocks are designed for insertion along the length of a hose / flexible pipe

They are useful for shutting off the supply of water without having to go back to the source.  They can also be used to reduce the flow of water through the pipe if required.  Where a split 2-way hose is in use, they can also be used to cut off (or reduce) the water supply to one or both pipes.  You can cut off the water supply to one pipe whilst maintaining supply to the other.

They are deigned for low pressure use (up to 1 Bar).  i.e. they are suitable for the majority of standard water supply pressures.

Maximum liquid temperature:  60 degrees C.

Available in 6 sizes: 6mm, 10mm, 13mm, 20mm, 25mm and 32mm.  

 

Fitting                

To fit, simply cut through the hose at the point where you want the stop-cock / tap to be inserted.

Push each end of the hose over the hose tails as far as they will go.

There should be no problems with the hose coming off the hose tails, but if this happens use a "jubilee" or hose clip at each end to secure.

Write an online review and share your thoughts with other shoppers!

Be the first to review this product

Copyright IBC Adapters. All rights reserved.
×