IBC DELUXE DELIVERY NOZZLE KIT Fuel / Oil / Water. 3/4" or 1" Tails + Hose Pipe

Product Condition:   New
Hose diameter (Internal)
Hose Length

£59.99

This is a Deluxe IBC Delivery Nozzle Kit.

The Kit contains:

  • 1 of high quality polypropylene Delux3e Trigger Delivery Nozzle
  • 1 of Heavy Duty "Swiveling" IBC Adapter(S60X6 coarse thread) with a 3/4" or 1" barbed hose tail.
  • 1 of 3/4" or 1" Clear Braided Technical Hose (available in 3 lengths)

The kit can be used for dispensing a variety of liquids including fuel oil, diesel and water.

NOZZLE SPECIFICATIONS

  • Made in Italy
  • Temperature range 15 C to +60 C
  • The trigger nozzle is also suitable for oils and fuels and has a working pressure of 5 bar (72 psi).
  • The maximum flow of the trigger nozzle is 120 Litres per minute.
  • The Nozzle is a manual shut off type and has the facility to leave the nozzle running without having to manually pull the trigger up to fill your container or vehicle

IBC ADAPTER SPECIFICATIONS

  • Made in the UK
  • The IBC thread is an S60X6 Coarse thread to fit an IBC Buttress thread measuring 60 mm across the threads and 6 mm between the threads.
  • The Adapter is made from glass reinforced polypropylene and is therefore extremely strong. It incorporates a Nitrile Rubber Seal.
  • The adapter has a 360 degree swivelling action which helps to reduce hose kinking and tangling, particularly when using longer lengths of hose.
  • All plastics used are Food Grade

HOSE PIPE SPECIFICATION

TECHNICAL HOSES are:

  • Very flexible
  • Durable,
  • Resistant to light and oxygen
  • Have a high abrasion resistance
  • Self-extinguishing after removal from flame
  • Insensitive to chemicals
  • Resistant to oil and petrol
  • Resistant to non-pressure hot water flow
  • Suitable for sterilization
  • Environmentally friendly
  • Cadmium free
  • Free of toxic components
  • Food Safe

WILL THE ADAPTER FIT MY TANK?

These adapters will fit most standard UK and European IBC containers where the buttress thread is a coarse S60X6 thread. An S60X6 Buttress thread measures 60 mm across from thread edge to thread edge and has a 6 mm pitch (distance between the threads).

If your tank buttress is not an S60X6 (about 20% are not) you can purchase a Buttress Thread Converter which will convert the thread to the S60X6 you will require. If you know the measurements of your buttress thread take a look at the “Buttress Thread Converters” Category which you can access from the home page. If you are not sure send us a message and we will try to point you in the right direction

Write an online review and share your thoughts with other shoppers!

Be the first to review this product

Copyright IBC Adapters. All rights reserved.
×