IBC ADAPTER (S60X6 coarse thread) with PVC Ball Valve & Barbed Hosetail Spout

IBC ADAPTER (S60X6 coarse thread) with PVC Ball Valve & Barbed Hosetail Spout



This is an adapter to fit standard UK & European IBC Containers which normally have a 2" BORE, which is a 60mm Butress/Coarse Thread (measured thread edge to thread edge).

It converts the S60 buttress IBC outlet thread (after the valve) to a more useful PVC Ball Valve with an angled Hose Tail Spout. Can be used as a pouring spout or with hose attached.

The working pressure of the valve is 0-150 psi.

Available with 3 spout (hose tail) sizes.....

1/2" (13 mm)

3/4" (19 mm)

1" (25 mm)

Sizes represent the INTERNAL diameter of hose that can be used with these.


These adapters will fit most standard UK and European IBC containers where the buttress thread is a coarse S60X6 thread. An S60X6 Buttress thread measures 60 mm across from thread edge to thread edge and has a 6 mm pitch (distance between the threads).

If your tank buttress is not an S60X6 (about 20% are not) you can purchase a Buttress Thread Converter which will convert the thread to the S60X6 you will require. If you know the measurements of your buttress thread take a look at the “Buttress Thread Converters” Category which you can access from the home page. If you are not sure send us a message and we will try to point you in the right direction.

Write an online review and share your thoughts with other shoppers!

Be the first to review this product

Copyright IBC Adapters. All rights reserved.