IBC Adapter (S60X6 2" Coarse Thread) to ANGLED Compression Connector. For solid pipe, MDPE, Alkathene etc.

Product Condition:   New
SIZE

£9.99

PLEASE NOTE: COLOUR & DESIGN OF THE COMPRESSION FITTING MAY VARY
​​​​​​​

IBC Adapter (S60X6 2" Coarse Thread) to ANGLED Compression Connector. For solid pipe, NDPE, Alkathene etc.

This is an adapter to fit standard UK & European IBC Containers which normally have a 2" BORE, which is a 60mm Butress/Coarse Thread (measured thread edge to thread edge). 
It converts the buttress IBC thread to a 20 - 50 mm ANGLED COMPRESSION FITTING which is normally fitted to blue polyethylene tubing for mains water services, but this will fit any pipe where the pipe OD (Outer Diameter) is 20 - 50 mm. 
Simply choose the size required from the drop down box above. 

PLEASE NOTE

The blue polyethylene pipe, comes in 20, 25, 32, and 50mm , so be sure to measure first. This is the OUTER DIAMETER not the ID/Bore which has historically been engineering convention

Historically in engineering we talk BORE (ID) when talking flexible hose pipes. So a 1" hose tail, will fit a 1" BORE (ID - Inner Diameter) hose pipe. 
Some not so bright spark has reversed this for the MDPE/Compression/Blue Pipe, so a 20mm MDPE Adapter will fit a 20mm OD (Outer Diameter) pipe such as the 20mm Blue tubing. 

Write an online review and share your thoughts with other shoppers!

Be the first to review this product

Copyright IBC Adapters. All rights reserved.
×