IBC ADAPTER (2" - S60-60mm) to 2x 32mm COMPRESSION Pipe Fittings MDPE Water



This is a HEAVY DUTY adapter to fit standard UK & European IBC Containers (60mm coarse thread - more details on fitment are below).

It converts the buttress IBC thread to 2x 32 mm COMPRESSION FITTINGS which are normally fitted to blue polyethylene tubing for mains water services, but this will fit any pipe where the pipe OD (Outer Diameter) is 32mm.

A few comments

2) Historically in engineering we talk BORE (ID) when talking pipes and hoses. So a 1" hose tail, will fit a 1" BORE (ID - Inner Diameter) pipe. Some not so bright spark has reversed this for the MDPE/Compression/Blue Pipe.

So a 20mm MDPE Adapter will fit a 20mm OD (Outer Diameter) pipe such as the 20mm Blue tubing.

If you bought some metal pipe which was 3/4" (20mm) then chances are this would be the Inner Diameter (bore) so you could NOT make the connection as the metal pipe would be bigger (roughly 25mm OD). As long as you know this, you wont make this mistake. Blame it on the bright spark who changed things round after a couple of hundred years!


Write an online review and share your thoughts with other shoppers!

Be the first to review this product

Copyright IBC Adapters. All rights reserved.