IBC Adapter (2" - S60 - 60mm) to 1" (25mm) Hose Tail

SEALS

£6.99

2" IBC (Tote) ADAPTER FITTING to 1" (25mm) Hose Pipe Connector.
This is an adapter to fit standard UK & European IBC Containers which normally have a 2" BORE, which is a 60mm Butress/Coarse Thread (measured thread edge to thread edge) . M ore details on IBC fitment are below

It converts the S60 buttress IBC outlet thread to a more useful 1" (25mm) hose connection (Internal Diameter).  If you are considering long distances, and you require a decent flowrate, you will be best upgrading to a 1.1/4" or 1.1/2". These are only available in our Heavy Duty range.  For maximum flowrates you should consider our 2" Hose Tails or MDPE Compression style.

You have the OPTION of either the Standard version, which is fitted with EPDM & Buna N (Nitrile) Seals or choosing the VITON Seal option for superior chemical resistance.

You can read more about whether you need VITON seals or not in the "Technical Information" section on the Home Page.

Write an online review and share your thoughts with other shoppers!

Be the first to review this product

Copyright IBC Adapters. All rights reserved.
×