Connector to Tap

Heavy Duty IBC CAP (S60X6 Coarse Thread) and 1/2" NYLON LEVER TAP to 1/2" hose tail

Heavy Duty IBC CAP (S60X6 Coarse Thread) and 1/2" NYLON LEVER TAP to 1/2" hose tail

This is a Heavy Duty IBC adapter with a NYLON lever tap and 1/2"  hose tail.

  1. The Tap is made from incredibly strong Nylon
  2. Easy On / Off Lever action.  Also good for flow control
  3. The Heavy Duty  IBC adapter has an S60X6 coarse 2" thread suitable for the majority of IBC containers
  4. The Tap output consists of a 3/4" BSP thread onto which a 1/2" Barbed hose tail is attached
  5. The hose tail is suitable for standard 1/2" (ID) garden hose (can be removed and replaced with alternative tap fittings)
  6. Highly resistant to tarnishing or corrosion
  7. The Nylon body provides a greater degree of frost protection than a brass tap

These items are supplied fully assembled and not in Kit Form 

Will it fit my tank?

It will fit most standard UK and European IBC containers where the buttress thread is a coarse S60X6 thread. An S60X6 Buttress thread measures 60 mm across from thread edge to thread edge and has a 6 mm pitch (distance between the threads).

If your tank buttress is not an S60X6 (about 20% are not) you can purchase a Buttress Thread Converter which will convert the thread to the S60X6 you will require.  If you know the measurements of your buttress thread take a look at the “Buttress Thread Converters” Category which you can access from the home page.  If you are not sure send us a message and we will try to point you in the right direction.

  • Weight:
    2.99kg
product review overlay image

Customer reviews

No reviews left yet
Write A Review

No reviews have been left for this product, be the first to leave a review